P0345 Camshaft Position Sensor A Circuit Malfunction (Bank 2)

Home » OBD Codes » P0300-P0399 » P0345 Camshaft Position Sensor A Circuit Malfunction (Bank 2)

P0345 Camshaft Position Sensor A Circuit Malfunction (Bank 2)

Technical Description

Camshaft Position Sensor A Circuit Malfunction (Bank 2)

What does that mean?

This diagnostic trouble code (DTC) is a generic powertrain code. It is considered generic because it applies to all makes and models of vehicles (1996-newer), although specific repair steps may be slightly different depending on the model.

This indicates that a problem was detected in the camshaft position sensor circuit of bank 2.

Since it says circuit, that means the problem could lie in any part of the circuit – the sensor itself, the wiring, or the PCM. Don’t just replace the CPS (camshaft position sensor) and think that will definitely fix it.

Symptoms

Symptoms can include:

  • Hard starting or no start
  • Rough running / misfiring
  • Loss of engine power
  • Causes

    A code P0345 could mean one or more of the following has happened:

  • a wire or connector in the circuit could be grounded/shorted/broken
  • the camshaft position sensor may have failed
  • the PCM may have failed
  • there exists an open circuit
  • the crankshaft position sensor may have failed
  • Possible Solutions

    With a P0345 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:

  • Visually inspect all the wiring and connectors in the circuit
  • Check for continuity in the circuit wiring
  • Check the operation (voltage) of the camshaft position sensor
  • Replace the camshaft position sensor as required
  • Check the crankshaft position circuit as well
  • Replace circuit wiring and/or connectors as required
  • Diagnose/replace the PCM as required
  • Need help?

    Let us fix your problem. You are most welcome our diagnosis experts have in most cases the knowledge and skills to find the cause of the error code p0345 and to solve the problems.

    Make an appointment for diagnosis

    "Delete Error Code Permanently, Disable DTC Error Code Function for p0345 in the ECU"

    In extreme cases, we even have the option to permanently remove the specific DTC p0345 and disable the function of the specific error code in the ECU. All other fault code functions will then continue to work to protect the engine. This is different from clearing an error code with a diagnostic device. We have the option to permanently remove the function of the specific error code, so that it never comes back. Also emergency running that occurs on the specific error code can be solved in most cases.

    Of course we prefer to first try to solve the cause of the error code, but sometimes the only solution is to permanently disable the DTC function of p0345.

    Make an appointment for permanent removal of p0345