P0133 02 Sensor Circuit Slow Response (Bank 1 Sensor 1)

Home » OBD Codes » P0100-P0199 » P0133 02 Sensor Circuit Slow Response (Bank 1 Sensor 1)

P0133 02 Sensor Circuit Slow Response (Bank 1 Sensor 1)

Technical Description

Oxygen Sensor Circuit Slow Response (Bank1, Sensor1)

What does that mean?

This is considered a generic powertrain DTC (code). That means it’s definition is the same for all makes and models of OBD-II vehicles, however specific repair steps may vary depending on the vehicle.

This trouble code involves the front oxygen sensor on Bank 1.

This code indicates the engine air fuel ratio is not being adjusted by the oxygen sensor signal or the ECM as expected to do so, or not adjusted as often as expected to do so once the engine is warmed or under normal engine use.

Symptoms

You will likely not notice any drivability problems, although there may be symptoms.

Causes

A code P0133 may mean that one or more of the following has happened:

  • The oxygen sensor is faulty
  • The wiring to the sensor is broken / frayed
  • There is an exhaust leak
  • Possible Solutions

    The simplest thing to do is to reset the code and see if it comes back.

    If the code comes back, the problem is more than likely the front Bank 1 oxygen sensor. You will likely wind up replacing it but you should also consider these possible solutions:

  • Check and fix any exhaust leaks
  • Check for wiring problems (shorted, frayed wires)
  • Check the frequency and amplitude of the oxygen sensor (advanced)
  • Check for a deteriorating / contaminated oxygen sensor, replace if necessary
  • Check for inlet air leaks
  • Check the MAF sensor for proper operation
  • Need help?

    Let us fix your problem. You are most welcome our diagnosis experts have in most cases the knowledge and skills to find the cause of the error code p0133 and to solve the problems.

    Make an appointment for diagnosis

    "Delete Error Code Permanently, Disable DTC Error Code Function for p0133 in the ECU"

    In extreme cases, we even have the option to permanently remove the specific DTC p0133 and disable the function of the specific error code in the ECU. All other fault code functions will then continue to work to protect the engine. This is different from clearing an error code with a diagnostic device. We have the option to permanently remove the function of the specific error code, so that it never comes back. Also emergency running that occurs on the specific error code can be solved in most cases.

    Of course we prefer to first try to solve the cause of the error code, but sometimes the only solution is to permanently disable the DTC function of p0133.

    Make an appointment for permanent removal of p0133