P254B PTO Speed Selector Sensor/Switch 1 Range/Performance

Home » OBD Codes » P2500-P2599 » P254B PTO Speed Selector Sensor/Switch 1 Range/Performance

P254B PTO Speed Selector Sensor/Switch 1 Range/Performance

OBD-II Trouble Code Technical Description

PTO Speed Selector Sensor/Switch 1 Range/Performance

What does that mean?

This is a generic powertrain diagnostic trouble code (DTC) and applies to many OBD-II vehicles (1996-newer). That may include but is not limited to vehicles from Ford, GMC, Chevy, Dodge, Ram, etc. Although generic, the exact repair steps may vary depending on year, make, model and powertrain configuration.

OBD-II trouble code P254B and related codes P254A, P254C, P254D and P254E are associated with the PTO or power take off speed selector sensor/switch 1 circuit.

The PTO or power take-off is a system that is linked to the transmission of the vehicle and is used to drive auxiliary equipment. That auxiliary equipment might include things such as snow plows, dump beds, etc.

When the PCM detects voltage or resistance within the PTO speed selector sensor/switch 1 circuit that is out of expected range or performance parameters, code P254B will be set and the check engine light, service engine soon light or both may be illuminated.

What is the severity of this DTC?

The severity of this code is generally not severe because it will likely only affect PTO functions but not regular vehicle functions.

What are some of the symptoms of the code?

Symptoms of a P254B trouble code may include:

  • Auxiliary PTO equipment will not function
  • Check engine light illuminated
  • What are some of the common causes of the code?

    Causes for this P254B code may include:

  • Defective PTO sensor
  • Faulty or damaged wiring
  • Corroded, damaged or loose connector
  • Defective fuse or fuse-able link (if applicable)
  • Defective PCM
  • What are some P254B troubleshooting steps?

    The first step in the troubleshooting process for any malfunction is to research the Technical Service Bulletins (TSB’s) for the specific vehicle by year, model and engine/transmission configuration. In some circumstances, this can save a lot of time in the long run by pointing you in the right direction.

    The second step is to locate all components associated with the PTO power take-off circuit and look for obvious physical damage. Perform a thorough visual inspection to check the associated wiring for obvious defects such as scraping, rubbing, bare wires, or burn spots. Next is to check the connectors and connections for security, corrosion and damaged pins. This process must include all wiring connectors and connections to all components including the PCM. Consult the specific tech data for the vehicle to verify the configuration of the oil level safety circuit and see if a fuse or fuse-able link is incorporated into the circuit.

    Advanced Steps

    The advanced steps become very vehicle specific and require the appropriate advanced equipment to perform accurately. These procedures require a digital multimeter and the specific technical references for the vehicle. In this situation, an oil pressure gauge may facilitate the troubleshooting process.

    This article is strictly informational and the specific technical data and service bulletins for your vehicle should always take priority.

    Need help?

    Let us fix your problem. You are most welcome our diagnosis experts have in most cases the knowledge and skills to find the cause of the error code p254b and to solve the problems.

    Make an appointment for diagnosis

    "Delete Error Code Permanently, Disable DTC Error Code Function for p254b in the ECU"

    In extreme cases, we even have the option to permanently remove the specific DTC p254b and disable the function of the specific error code in the ECU. All other fault code functions will then continue to work to protect the engine. This is different from clearing an error code with a diagnostic device. We have the option to permanently remove the function of the specific error code, so that it never comes back. Also emergency running that occurs on the specific error code can be solved in most cases.

    Of course we prefer to first try to solve the cause of the error code, but sometimes the only solution is to permanently disable the DTC function of p254b.

    Make an appointment for permanent removal of p254b