P2175 Throttle Actuator Control System – Low Air Flow Detected

Home » OBD Codes » P2100-P2199 » P2175 Throttle Actuator Control System – Low Air Flow Detected

P2175 Throttle Actuator Control System – Low Air Flow Detected

OBD-II Trouble Code Technical Description

Throttle Actuator Control System – Low Air Flow Detected

What does that mean?

This generic powertrain diagnostic trouble code (DTC) typically applies to all OBD-II equipped vehicles that use a drive-by-wire throttle control system including but not limited to vehicles from Dodge, Ram, Chrysler, Fiat, Volvo, Cadillac, Ford, etc.

The P2175 OBD-II trouble code is one of number of possible codes that indicates that the Powertrain Control Module (PCM) has detected a malfunction in the operation of the Throttle Actuator Control System.

The PCM sets these when other codes are present that indicate an issue that may be safety related or cause damage to the engine or drivetrain components if not corrected in a timely manner. This and related codes (P2172, P2173, P2174, and P2175) all indicate detected air flow problems.

Code P2175 is set by the PCM when low air flow is detected in the throttle actuator control system.

This code can be related to a Throttle Actuator Control System malfunction, but it is possible that another issue is setting this code. The Throttle Actuator Control System is duty cycle controlled by the PCM and the function of the system is limited when other fault codes are detected.

Code Severity & Symptoms

The severity of this code can be moderate to severe based on the specific malfunction. Symptoms of a P2175 trouble code may include:

  • Malfunction Indicator Lamp (MIL) or ABS warning lamp illumination
  • Engine may not start
  • Either no or low throttle response
  • Automatic transmission will not shift
  • Additional codes are possibly set
  • Common Causes Of This DTC Code

    Potential causes of the P2175 throttle engine code may include:

  • Engine Overheating
  • Manifold Absolute Pressure Malfunction
  • Abnormal System Voltages
  • P2175 Diagnostic and Repair Procedures

    The first step in the troubleshooting process for any malfunction is to research the Technical Service Bulletins (TSB’s) for the specific vehicle by year, model and power plant. In some circumstances this can save a lot of time in the long run by pointing you in the right direction.

    The second step for this code is to complete a PCM scan to identify other trouble codes. This code is an informational code and in most circumstances this code’s function is to alert a driver that the PCM has initiated a fail-safe mode because of a malfunction or failure in a system that is not directly related to the Throttle Control Actuator.

    If other codes are identified you should check for TSB’s related to the specific vehicle and that code. If a TSB has not been generated you should follow the specific troubleshooting steps for that code to pinpoint the source of the malfunction that the PCM is detecting to put the engine in fail-safe or limp mode.

    Once all other codes have been cleared or if no other codes are detected, if the Throttle Control Actuator code still exists the PCM and Throttle Control Actuator should be evaluated. All wiring and connections should be visually inspected for obvious defects as a starting point.

    Common Mistake

    Replacing the Throttle Control Actuator or PCM when other malfunctions are setting this code.

    Rare Repair

    Replace Throttle Actuator Control

    Hopefully, the information in this article has been helpful to point you in the right direction to correct the problem with your Throttle Actuator Control System force code. This article is strictly informational and the specific technical data and service bulletins for your vehicle should always take priority.

    Need help?

    Let us fix your problem. You are most welcome our diagnosis experts have in most cases the knowledge and skills to find the cause of the error code p2175 and to solve the problems.

    Make an appointment for diagnosis

    "Delete Error Code Permanently, Disable DTC Error Code Function for p2175 in the ECU"

    In extreme cases, we even have the option to permanently remove the specific DTC p2175 and disable the function of the specific error code in the ECU. All other fault code functions will then continue to work to protect the engine. This is different from clearing an error code with a diagnostic device. We have the option to permanently remove the function of the specific error code, so that it never comes back. Also emergency running that occurs on the specific error code can be solved in most cases.

    Of course we prefer to first try to solve the cause of the error code, but sometimes the only solution is to permanently disable the DTC function of p2175.

    Make an appointment for permanent removal of p2175